Fan Niroo
Home Page > About Us > Factories at a Glance > Equipment 

Parand1

First and main Fan Niroo`s factory in parand industrial state.

More

Parand2

Second Fan Niroo Group factory which Fan Jooyan Pars Niroo built it.

More

Parand3

Equipped‬ factory with modern machine like Submerge, CNC cutting and ...

More

Boeein Zahra

This factory is the first Factory in Fan Niroo Group which it was built in 2000

More

Shirin noo

Most of Fan Niroo Project are in Assaluyeh, This reason case of Fan Niroo build new factory in Assaluyeh.

More

Transfer Facility
An overhead crane, commonly called a bridge crane, is a type of crane found in industrial environments. An overhead crane consists of parallel runways with a traveling bridge spanning the gap. A hoist, the lifting component of a crane, travels along the bridge. If the bridge is rigidly supported on two or more legs running on a fixed rail at ground level, the crane is called a gantry crane (USA, ASME B30 series) or a goliath crane (UK, BS 466).

Bending
Bending is done using Press Brakes. Press Brakes normally have a capacity of 20 to 200 tons to accommodate stock from 1m to 4.5m (3 feet to 15 feet). Larger and smaller presses are used for specialized applications. Programmable back gages, and multiple die sets available currently can make for a very economical process

Welding
Submerged arc welding (SAW) is a method in which the heat required to fuse the metal is generated by an arc formed by an electric current passing between the electrode and the work piece. A layer of granulated mineral material known as submerged arc welding flux covers the tip of the welding wire, the arc, and the work piece. There is no visible arc and no sparks, spatter or fume. The electrode may be a solid or cored wire or a strip.

Machining
Computer Numerical Control (CNC) is one in which the functions and motions of a machine tool are controlled by means of a prepared program containing coded alphanumeric data. CNC can control the motions of the work piece or tool, the input parameters such as feed, depth of cut, speed, and the functions such as turning spindle on/off, turning coolant on/of.
Transfer Facility
  • Over head crane with capacity 3 to 7 tons
  • Over head crane with capacity 10 tons
  • Over head crane with capacity 20 tons
  • Over head crane with capacity 25 tons
  • Over head crane with capacity 32 tons
  • Mobile head crane with capacity 5 tons
  • Crane with capacity 7tons
  • Crane with capacity 10tons
  • Stepladder
  • Rotating Machine
  • Chain Block
Bending Facility
  • Electrical Cutting & Bending Machine for pipe and plate
  • Pipe Bender Machine
  • Rolling Machine
Welding Facility
  • Welding Machine
  • MIG Welding Machine
  • TIG Welding Machine
  • SAW Welding Machine
  • Oxygen Slender
  • Electrode Oven
Machining Facility
  • CNC Cutting Machine
  • Plasma Cutting Machine
  • 7 in 1 Cutting Machine
  • Sawing Machine
  • Strip Sawing Machine
  • Pipe Bender Machine
  • Automatic Pipe tester